Views: 0 Author: Site Editor Publish Time: 2022-12-30 Origin: Site
MCA Battery has more than 20 years of VRLA battery manufacturing experience. The company has passed ISO 9001, ISO 14001, and ISO 45001 certifications. The plates are manufactured by MCA itself. This way we can confirm that the quality of the key components of the battery is good. Our Deep Cycle AGM battery use high-purity materials, pure lead: 99.994%. We accept OEM & ODM and keep developing new products. The product has international certifications: CE, and UL. Material Safety Data Sheet, we provide reasonable prices and quality products. We deliver on time within 25-45 days after order confirmation.
Here is the content list:
l The release of Deep cycle AGM battery
l Installation of Deep cycle AGM battery
l Features of our Deep cycle AGM battery
1. The continuous discharge current cannot be greater than 3CA, and the maximum discharge current (5s) should be less than 6CA.
2. Charge the Deep cycle AGM battery immediately after discharge. Do not store batteries until fully charged. If the Deep cycle AGM battery is discharged without charging for a long time, it cannot be restored to full capacity.
1. Before installation, please confirm that the appearance of the Deep cycle AGM battery is normal. The battery should be installed firmly and safely to avoid impact or deformation.
2. When the battery is installed on the device, please keep it away from the heater (transformer, etc.). Install as vertically as possible and ensure good ventilation.
3. The battery may release harmful gas. Do not install it in a closed place and keep away from flammable materials (switches, fuses).
4. Do not cover or pack the battery with vinyl chloride, otherwise, it may cause damage to the battery.
5. Do not twist the battery terminals or solder directly.
6. Avoid exposure to sunlight. Avoid exposure to high-intensity infrared or ultraviolet light. Avoid contact with organic solvents, mist, dust, and corrosive gases. Avoid undue vibration.
7. When the battery is connected to the charger or load device, please make sure the switch is off. The positive pole of the battery is connected to the positive pole of the charger or device, and the negative pole is connected to the negative pole.
8. Do not mix batteries of different capacities or types. Also do not use new and old batteries at the same time.
9. If the Deep cycle AGM batteries need to be connected in parallel, please contact us.
1. Deep cycle design, 4BS leading the previous technology: long service life.
2. Unique corrosion-resistant grid alloy with, a special lead wire design, the Deep cycle AGM battery has good deep discharge ability and recovery ability after deep discharge.
3. Radial plate design, tight assembly technology: high-efficiency discharge performance.
4. High-quality gas-phase silica gel electrolyte: no flow, no leakage, and each part of the plate react evenly.
5. High purity of raw materials: low self-discharge rate.
6. Oxygen composite technology: safe and environmentally friendly.
Our official website is https://www.mcabattery.com/. If you want to know more about Deep cycle AGM batteries, you can communicate with us on the website. We will be glad to provide you with a high-quality Deep cycle AGM battery, good service, and competitive prices to provide more and better service!
